Insignia NS-1DRVCR Manuel d'utilisateur télécharger pdf (Page 10)

www.insignia-products.com

• Do not remove any labels or stickers on the

back panel of your recorder.

• Place your recorder in the location you want.

Your recorder is designed to be used on a

level, stable, flat surface, such as a table,

desk, shelf, or stand convenient to a power

outlet, out of direct sunlight, and away from

sources of excess heat, dust, moisture, or

vibration.

• Unwind the AC power cord and extend the

cord to its full length, then plug it into the back

of the recorder.

Power source

Use the polarized AC line cord provided for

operation on AC power. Insert the AC cord plug

into a standard 120 V 60 Hz polarized AC outlet.

If you cause a static discharge when touching

your recorder and your recorder fails to function,

unplug your recorder from the AC outlet and plug

it back in. Your recorder should return to normal

operation.

Connecting your recorder to a TV

Make one of the following connections,

depending on the capabilities of your TV.

Video connection

To connect to your TV with a video cable:

• Connect the VIDEO OUT jack on the

recorder to the VIDEO IN jack on the TV

using the video cable supplied.

S-Video connection

To connect to your TV with an S-Video cable:

• Connect the S-VIDEO OUT jack on the

recorder to the S-VIDEO IN jack on the TV

using an optional S-Video cable.

Component video/progressive scan connection

If your television is a high-definition or “digital

ready” television, you can take advantage of the

recorder’s progressive scan output for the

highest quality video possible.

To connect to your TV with a component

video cable:

• Connect the COMPONENT/PROGRESSIVE

SCAN VIDEO OUT jacks on the recorder to

the corresponding in jacks on the TV using

an optional Y Pb Pr cable.

Audio connection

To connect to your TV with audio source:

• Connect the Left and Right AUDIO OUT

jacks on the recorder to the audio left and

right in jacks on the TV using the supplied

audio cables.

Warnings

• The system uses a polarized AC plug with one

wide blade and one narrow blade. The plug will

only fit into matching polarized power outlets.

This is a safety feature to reduce the possibility

of electric shock. If the plug will not fit in your

power outlets, you probably have outdated,

non-polarized outlets which should be changed

by a qualified, licensed electrician. Do not file

the wide blade on the plug or use an adapter to

make the plug fit into your outlet. This defeats

the safety feature and could expose you to

electric shock.

• Never connect the AC cord plug to other than

the specified voltage (120 V 60 Hz). Use the

attached power cord only.

Notes

• Make sure that the recorder is connected

directly to the TV, then tune the TV to the

correct video input channel.

• Do not connect the recorder’s AUDIO OUTPUT

jack to the PHONO IN jack (record deck) of

your audio system.

• Do not connect the recorder through another

VCR. The DVD image could be distorted by the

copy protection system.

• The picture and sound of a nearby TV, VCR, or

radio may be distorted during playback.

Position the units away from each other or turn

off the unit after removing the disc.

Note

If you use this connection, set the TV’s

source selector to VIDEO.

Notes

• Set the resolution to 480p using the P/SCAN

button on the front panel.

• Progressive Scan does not work with the

Audio/Video or S-Video connections.

• If your TV does not accept the Progressive

Scan format, the picture will appear scrambled.

COMPONENT/PROGRESSIVE SCAN

VIDEO INPU

AUDIO INPUT

S-VIDEO

INPU

S-Video cable

Audio

cable

Y Pb Pr cable

Audio

cable

Video

cable

Back of recorder

Back of TV

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Insignia NS-1DRVCR Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Insignia NS-1DRVCR